There are two ways to check your blender’s battery status:
- In the mobile application;
- On your blender (without App).
If you are using millo mobile App, then the blender’s battery level is always visible in the upper right corner of the screen, when the mobile app is connected to the blender (millo blender should be switched on).
This battery icon with percentage will be in green, when blender is charging at this moment & black if it is not charging.
❗With a new millo blender it takes three times to charge and discharge the battery in order to see its full capacity and usage.
If you use millo blender without App, then to know battery charge level - press the power button once at the bottom of the blender base when the device is not in use (but blender should be turned on). The base’s LED indicators will then show you how much power is approximately left. Bright lights show the existing battery level, while blurred lights indicate the total battery capacity.
We have 17 LED lights for 100% battery charge. So it means 1 light is for approx 6% of charge.
Few examples to understand better the bright lights meaning
1) This is 7 bright lights, so means about 40% battery charge:
2) This is 11 bright lights visible, so means about 66% battery charge:
Charging. If the blender wasn’t discharged fully, bright lights will indicate the status and two lights will blink from both sides until it switches back to one light blinking. If at any time you would like to check how much the blender has charged, shortly press the power button at the bottom of the blender.
Low battery. When the battery is running low, the blender’s manual controls will stop working. Only one bright light will be displayed when you touch the controls:
The app will indicate clearly when the battery is low:
Millo can be used for blending while plugged in but it needs to be charged enough to start the blending cycle. In such a case you have to charge the blender till a minimum of 3 bright lights is visible (±20% battery charge). It should take approximately 15-20 min to charge with a millo charger included.
Please sign in to leave a comment.